Your shortlist may show MIL-STD-810 on the first line of each candidate. That’s where the trouble starts. The word “military” on a military tablet tells you almost nothing. The test list behind it tells you what you’re buying. Seatronx’s three military tablets, the MILTAB-116AD, the RVT-10A-2 and the RVT-7, carry three different lists.
Pick on the word, and the list may not match the program’s requirement. That can mean a failed acceptance check or a re-test. It can mean a change order. And it can leave you with a unit that can’t go where it was planned.
So read the tests behind the label. Then ask for the report before you order.
What a MIL-STD Line Does and Doesn’t Tell You
MIL-STD-810 isn’t a certificate. It’s a collection of environmental test methods and engineering guidance. A testing laboratory, Intertek, makes that point in its overview of environmental testing for aerospace. It adds that compliance is generally shown through a documented test plan, completed test methods and supporting qualification reports.
That’s why the line “MIL-STD-810H” on its own leaves you with open questions. Which methods were run? Which procedure under each one? At what severity?
The letter H names the revision. The method numbers name the tests. The procedure and severity set how hard each test pushed the unit. Two tablets can both carry “810H” and still share little.
When a military tablet shows only the revision, you don’t yet know what it went through. EMI works the same way. MIL-STD-461 is a set of tests that gets tailored to the hardware and where it’s installed. A 461 line needs its own test list too.
Three Military Tablets, Three Test Lists
Start from Seatronx’s military tablets page and the lists don’t line up. Here they are side by side.
| Tablet | Shock and vibration | Drop and ingress | EMI tests |
|---|---|---|---|
| MILTAB-116AD | Shock: MIL-STD-810H Method 516.8 Procedure I. Vibration: MIL-STD-810H Method 514.8 Procedure I. | Drop: MIL-STD-810H Method 516.8, 4 ft. Ingress: IP65. | Standard: MIL-STD-461G CE101, CE102, RE101, RE102 and CS118. Options: CS101, CS114, CS115, CS116, RS101 and RS103. |
| RVT-10A-2 | Shock: none listed. Vibration: none listed. | Drop: MIL-STD-810H, 1.22 m, no method or procedure. Ingress: IP65. | None listed. |
| RVT-7 | Shock: none listed. Vibration: MIL-STD-810G. | Drop: 1.5 m. Dust: IP6x. Water: IPx6. | None listed. |
A “None listed” cell doesn’t mean a tablet failed that test. It means there’s nothing to check against yet, so it turns into a question for Seatronx. The full MILTAB-116AD specification is on Seatronx’s MILTAB-116AD page.
Read the 810 Line, Then Ask What Sits Behind It
The MILTAB-116AD names its methods and procedures. Shock is MIL-STD-810H Method 516.8 Procedure I. Vibration is MIL-STD-810H Method 514.8 Procedure I. Its 4 ft drop sits under Method 516.8. You can hold that list against a contract line by line.
The RVT-10A-2 carries “MIL-STD-810H” with a 1.22 m drop. No method or procedure is named. Your first question is which 810H tests sit behind that mark, and under which procedures.
The RVT-7 carries vibration to MIL-STD-810G, a 1.5 m drop, an IP6x dust test and an IPx6 water test. Note the revision.
810G and 810H are different revisions of the standard. As a general rule, check which one the program’s contract names. A test run to 810G may not answer a line written against 810H.
A Drop Height Isn’t the Whole Test
The MILTAB-116AD’s 4 ft and the RVT-10A-2’s 1.22 m are about the same height. The difference is that one names its method and the other doesn’t. In general, the surface the tablet lands on, the orientation at impact and the number of drops can change what a height means. Ask about all three before you compare drop figures.
A test line also applies to the configuration that was tested. An added option or a different battery may change it. Ask Seatronx for the report behind each listed test, with its procedure and severity, for the exact build you plan to order.
EMI: Standard Tests and Options
The MILTAB-116AD carries MIL-STD-461G CE101, CE102, RE101, RE102 and CS118 as its default set. CS101, CS114, CS115, CS116, RS101 and RS103 are options. RE102 is a radiated emissions test. RS103 is a radiated susceptibility test.
If the program’s contract calls for one of the optional tests, order it as an option. As a general rule, an option that isn’t ordered isn’t on the tablet. Check the contract’s 461 list against the default set before the order goes in.
Which 461 tests apply depends on the program and the installation. You can’t read that off a tablet. In Compliance Magazine’s column on tailoring guidance notes that MIL-STD-461 is explicit that it must be tailored. Revision G includes a table of which requirements apply to which applications. So the contract sets the list, and the tablet’s default set either covers it or it doesn’t.
The RVT-10A-2 and the RVT-7 have no EMI test listed. If the program calls for EMI testing, ask Seatronx before you choose either one.
Power, Battery and Operating System
The MILTAB-116AD runs Windows 11 IoT Enterprise LTSC, with Windows 10 IoT Enterprise LTSC as an option. Its hot-swappable battery is 11.55 V, 4,558 mAh. The standard battery’s operating time is 8 hours. A 15.4 V, 5,900 mAh battery is optional. A USB-C port takes 20 V power delivery input. A vehicle dock, vehicle cradle and vehicle charger are options, along with a desk dock. It uses fan cooling and carries TPM 2.0.
The RVT-10A-2 runs Android 14. It has a removable 3.8 V, 10,000 mAh battery and a 1000 nit display.
The RVT-7 is listed with Android 7.1.2. Confirm the operating system version of the current build before you order. It takes 8 to 36 VDC input and has a 5,000 mAh battery. Confirm with Seatronx whether your crew can swap it in the field. Its docking station comes in a version that supports J1939 or OBD-II.
Windows or Android is its own decision, and it turns on the applications the crew runs. Seatronx’s guide to choosing the rugged tablet OS around your field applications covers that question.
Choose by Test List
Pick the military tablet whose list answers the contract. Then confirm it with the report.
Choose the MILTAB-116AD if the program calls for named 810H methods and MIL-STD-461G tests. Seatronx’s MILTAB-116AD is an 11.6 inch Windows tablet with an 850 nit optically bonded display, IP65 protection and a hot-swappable battery. Check the contract’s EMI list against its default set, and order any optional test the contract names.
Choose the RVT-10A-2 if the program needs an 810H-marked Android tablet at 10.1 inches and no EMI list is required. Ask which 810H methods sit behind the mark before you commit.
Choose the RVT-7 if you need a 7 inch tablet that docks into a vehicle with J1939 or OBD-II, and the program doesn’t call for 810H shock or EMI tests.
The same standards come up when you specify laptops. Seatronx’s guide to when a rugged laptop becomes military-grade covers them from that side.
Where Each One Falls Short
The MILTAB-116AD’s default EMI set covers five tests. The other six are options, so a contract that names them means ordering them up front. It also uses fan cooling. If the program has a requirement that touches cooling, raise it with Seatronx early.
The RVT-10A-2 has no method, procedure or EMI list behind its 810H mark. Until you see the report for the build, you can’t map it against a contract.
The RVT-7 carries vibration to 810G only. No shock test or EMI list is given for it. On a contract written against 810H, that’s a gap to close before you choose it.
Questions to Settle Before You Order a Military Tablet
Settle these with the contract open.
- Match the contract’s MIL-STD-810 revision and methods to the tablet’s list, procedure by procedure.
- List the MIL-STD-461 tests the contract calls for, and check whether the tablet carries each one as standard or as an option.
- Ask about the drop surface and the number of drops, not only the height.
- Ask which ingress rating applies and how it was tested.
- Check that the operating system and battery fit the crew’s shift and the vehicle.
- Ask Seatronx for the report that matches the exact build you’ll order.
Once you have those answers, tell Seatronx about the program, the vehicle and the test list it calls for.