Before you choose an outdoor kiosk, hold each model against your own site on five points: direct sun, water, heat, public handling and layout. Read what the model’s own product page states — enclosure rating, brightness range, rated operating temperature, how it’s cooled, glass and touch options — then compare those figures with the spot where the unit will stand. Screen size comes last.

Skip that comparison and the cost shows up after installation: a screen people can’t read at midday, or a unit that has to be reworked or swapped on site. That’s hardware, downtime and credibility with the people the kiosk was put there to serve. So start with the site, not the catalog.

How bright does the screen have to be for your site?

Bright enough for the light that reaches it. There’s no single figure that works everywhere, so compare the brightness range a model states with your site’s exposure: an open plaza at noon, a shaded transit shelter, a canopy, a wall that faces west. Then check whether the unit adjusts brightness on its own.

Seatronx states brightness per model. The 43-inch single-sided, 43-inch double-sided and 55-inch side-by-side pages list 2000-3500 nits with automatic brightness adjustment. The 55-inch single-sided page lists high brightness options of 2500-3500 nits, 5mm anti-glare tempered glass and a vertical design. Different model, different numbers. Don’t carry a figure from one page onto another.

Automatic adjustment earns its keep when the light at the site swings through the day — morning shade, afternoon glare, then dark. A fixed output has to be chosen for one lighting condition, and the rest of the day lives with that choice. Where a page says the kiosk adjusts brightness itself, that’s one less setting for someone to manage on site.

What does an IP65 rating cover, and what does it leave out?

The second digit is about water jets. NEMA’s enclosure types document explains that a second characteristic numeral of 5 or 6 designates protection against water jets, and that the standard doesn’t cover mechanical damage, condensation or corrosive vapors. An IP65 kiosk still needs its glass and its internal moisture handling confirmed separately.

Those digits come from the IEC standard on degrees of protection provided by enclosures, IEC 60529. The first numeral describes protection against solid foreign objects and against people reaching what’s inside. The second is the water digit.

All six models on the Seatronx outdoor IP65 kiosks page carry that rating, from 43-inch single-sided through 55-inch side-by-side. Seatronx names retail stores, airports, hospitals, public spaces and outdoor venues among the places they go. The 43-inch double-sided page puts its exposure in plain words: fully dustproof, rainproof, snowproof and resistant to direct sunlight.

Impact is a separate conversation from water. If the unit will stand where carts, ladders and elbows reach it, ask about the glass specifically: the 43-inch double-sided page lists laminated glass, and the 55-inch single-sided page lists tempered glass. Condensation is its own item too. An IP figure says nothing about moisture forming inside the enclosure, so ask how a model handles it.

Will your site stay inside the model’s rated temperature range?

Compare the range on a model’s page with the temperature extremes at your site, not a regional average. The 43-inch single-sided, 43-inch double-sided and 55-inch side-by-side pages state operation from -20°C to 50°C with a built-in super cooling system. Confirm the figure for the exact model you’re quoting, and confirm what that page says about moving heat out.

The 55-inch single-sided page reads differently. It lists an intelligent exhaust system, and its features list doesn’t state an operating range at all, so ask for that figure instead of assuming it matches the others.

Some projects try to dodge the question by putting an indoor panel inside a weatherproof box. That moves sun, heat and sealing onto whatever you build. When that idea is on the table, the case for an industrial display instead of a commercial monitor is worth reading before it becomes the plan.

Should the kiosk take touch, or only display?

Decide it by what you want people to do. A wayfinding or advertising screen can run as a display only, and the kiosk pages describe those uses. Touch adds an interactive path plus a surface the public will press with wet hands. On the Seatronx pages, capacitive touch appears as an option rather than a default.

It’s listed as an option on the 43-inch pages and on the 55-inch side-by-side, so touch is something you specify rather than something you inherit. The 43-inch double-sided page names advertising, wayfinding and public information displays among its uses, and the side-by-side page adds interactive applications. Those are different jobs, and they ask different things of the hardware.

Rain changes how a capacitive surface responds. If people will touch this kiosk in wet weather, read how wet capacitive touchscreens behave before you commit to an interactive layout. Then decide whether the interaction earns its place at this site, or whether a display-only unit does the job.

Which layout fits how people reach the kiosk?

Follow the approach path. A single-sided unit suits a wall, a queue or an entrance people face from one direction. Double-sided serves a walkway with traffic in both directions. Side-by-side gives two screens at one stop, which suits a wider message or a split between wayfinding and advertising.

Single-sided

One screen, one approach. Seatronx lists a 43-inch single-sided model, a 55-inch single-sided model and a 55-inch G series single. The 43-inch single-sided page lists IP65 protection, a built-in super cooling system, a wide temperature range of -20°C to 50°C, automatic brightness adjustment, 2000-3500 nits and an optional capacitive touchscreen. The 55-inch single-sided page lists IP65, brightness options of 2500-3500 nits, 5mm anti-glare tempered glass, an intelligent exhaust system and a vertical design. Its features list also notes four selectable operating systems without naming them, which makes that a supplier question.

Double-sided

Screens on both faces, for a path people walk in both directions. The double-sided 43-inch outdoor kiosk page states IP65 construction, dual screens, a built-in super cooling system, operation from -20°C to 50°C and automatic brightness adjustment, with optional capacitive touchscreens, laminated glass and customizable brightness of 2000-3500 nits. A 55-inch double-sided model sits in the range as well.

Side-by-side

Two screens facing the same way, at one stop. The side-by-side 55-inch outdoor kiosk page states two 55-inch screens positioned side by side at 2000-3500 nits, with the same IP65 rating, built-in super cooling system, -20°C to 50°C range, automatic brightness adjustment and optional capacitive touchscreen. It names outdoor advertising, public information displays and interactive applications as its uses. That pairing suits a site where one screen holds a map and the other holds the message you want read while someone is standing there.

Seatronx’s outdoor kiosk range comes in single-sided, double-sided and side-by-side layouts at 43 and 55 inches, so the layout can follow how people approach your site rather than the other way around. Stand at the spot during its busiest hour and watch which way people come from. That observation costs nothing, and it narrows the list quickly.

Confirm the site details with the site owner or installer

Five things sit outside the spec sheet, and no product page can answer them for your site. Get them in writing with whoever owns the property and whoever will install the unit.

  • Power: what’s available at the exact spot, and who brings it there.
  • Network: wired, wireless or neither, and who owns the connection.
  • Mounting surface: what the kiosk stands on or fixes to, and who prepares it.
  • Service: who opens the unit after handover, and how they get to it.
  • Permits and site rules: what the local authority and the property require before anything goes in the ground.

Frequently Asked Questions

Can an IP65 kiosk be washed down?

The second numeral in an IP rating is the water digit, and a 5 or 6 there designates protection against water jets. That describes the enclosure’s tested protection, not a cleaning method, so confirm with the supplier which cleaning method, chemicals and pressure the kiosk can take before it goes into a maintenance plan.

Why do two kiosks in the same range list different nit ranges?

Because they’re different products with different specifications. The 43-inch single-sided, 43-inch double-sided and 55-inch side-by-side pages list 2000-3500 nits. The 55-inch single-sided page lists high brightness options of 2500-3500 nits. Read the page for the model you’re quoting and compare its figure with the light at your site, rather than treating one number as the whole line’s.

How many kiosk models are in the Seatronx outdoor range?

Six carry an IP65 protection level: 43-inch single-sided, 43-inch double-sided, 55-inch single-sided, a 55-inch G series single, 55-inch double-sided and 55-inch side-by-side. Size and layout are the two axes. Which one suits you depends on how far away people will read from and which directions they approach from.

Is a kiosk rated for snow as well as rain?

Check the page for the model. The 43-inch double-sided description covers dust, rain, snow and direct sunlight in plain terms. Cold is a separate figure from water. The 43-inch and side-by-side 55-inch pages state operation from -20°C to 50°C, so compare your site’s low temperature with the range stated for the model you want, not with another model’s.

What should I send a supplier to get a useful shortlist?

Sun exposure and which way the screen will face. The highest and lowest temperatures the site sees. Whether people approach from one side, both sides or head-on. Whether anyone needs to touch the screen, and whether they’ll do it in the rain. Viewing distance, since that drives screen size. Power, network and mounting are worth stating too, even as open questions.

Start with the site, then pick the model

Walk the spot. Note the sun at the hour that matters, the temperature extremes, the direction people come from, and whether anyone has to touch the screen. Then set the models you’re considering beside those notes and read their stated figures line by line. A kiosk that suits its site is a specification problem, and it’s solvable before anything gets bolted down.

When the site is written down, send Seatronx your site conditions and layout along with the model you’re leaning toward.